Setting Routes

Route Display

After setting a destination, press [Menu] > [Route] on the map screen.

Cancel Route

Cancel the currently set route.

Reroute

Searches a route to the destination again.

Route Options

Various route options are available to search for the set destination.

Edit Route

Started location, waypoint and destination are listed. The corresponding locations and the list order can be edited.

Route Overview

Check the route overview to the set destination.

Route Info./Avoid

Shows the distance, the estimated arrival time or remaining time, and the road information. You can set the alternative route by checking the roads to avoid.

Destination Info.

Shows the remaining distance, the estimated time required and the estimated time of arrival to the set destination.

Stop route/Resume Route

Stop or resume the navigation to the current set destination.
Press and hold [Cancel Route] at the bottom of the map screen to stop the current route. Press [Resume Route] to resume.

Cancel Route

Cancels the route to the set destination. Press [Cancel Route] at the buttom of the map screen or press [Menu] > [Route] > [Cancel route] on the map screen.

Route Options

Various route options are available to search for the set destination.

1. Press [Menu] > [Route] > [Route Options] on the map screen.
2. Select the desired route options.

,NOTE

Route options may be displayed differently depending on vehicle communication capabilities and specifications.

EDIT ROUTE

Waypoints can be added/deleted/edited and the order can be changed.

Adding waypoints

Add the waypoint(s) after setting the destination. Up to 2 waypoints can be added.

If 2 waypoints have been added, add a new waypoint after deleting an added waypoint.

1. Press [Menu] > [Route] > [Edit Route] on the map screen.

2. Press [Add Waypoint 1].
3. Set a waypoint using various searching method.

4. Pree [Add Waypoint 2] to add another waypoint.
5. Press [Calculate].
6. Select a desired route.

Destination/Waypoint Map View and DELETE

1. Press [Menu] > [Route] > [Edit Route] on the map screen.
2. After pressing the waypoint or destination, press [Show Map] or [Delete].

Changing route order

In case of any added waypoint, the route order among the waypoints the destination can be changed each other.

1. Press [Menu] > [Route] > [Edit Route] on the map screen.
2. After pressing the waypoint or destination, press [Change Order].

3. Change the order by pressing and dragging the waypoint or destination.

4. Press [Calculate].
5. Select a desired route.

Route Overview

Check the route overview to the set destination.

1. Press [Menu] > [Route] > [Route Overview] on the map screen.

2. Select a desired route.

Route Information/Avoid

Shows the distance, the estimated arrival time or remaining time, and the road information. You can set the road to avoid and set the alternative route.

1. Press [Menu] > [Route] > [Route Info./Avoid] on the map screen.

2. Press the street to check the map information. And press the checkmark to select the street(s) that you want to avoid.
3. Press [Reroute] > [Yes].
4. Select a desired route.

Destination Information

Shows the remaining distance, the estimated time required and the estimated time of arrival to the set destination.

1. Press [Menu] > [Route] > [Destination Info.] on the map screen.

2. Select a desired item.

• [Reroute]: Search for the route to the currently set destination again.
• [Time Info Displayed]: Check the remaining distance and the estimated time of remain or arrival to the set destination.