Using the Valet mode

Use the Valet mode to protect your personal information and view the vehicle information.

Valet mode protects your personal information by disabling control using the screen or buttons. Vehicle information created during valet mode can be viewed from the GENESIS Connected Services App.

The following vehicle-related data can be viewed from the GENESIS Connected Services App.

• •  Valet mode start time
• •  Engine off time
• •  Driving distance/hours and maximum vehicle speed after valet mode activation

• To use Valet mode, make sure you install the GENESIS Connected Services App on your smartphone and sign up for the GENESIS Connected Services. Use either Google Play Store or App Store (depending on your smartphone model) to download and install the GENESIS Connected Services App and sign up for the GENESIS Connected Services. ▶  See "Subscribing to the service."

1. On the All Menus screen, press Valet Mode.
   • To access the online user's manual on the Valet Mode screen, press ▶ User's Manual on Web (QR Code) and then scan the displayed QR code.
2. Enter a password to turn on the valet mode.

   Your personal information is protected, as control using the screen or buttons is disabled.

   • To turn off valet mode, enter the password you set when turning on the mode.
   • It is not possible to turn off Valet mode if you enter your password incorrectly five times in succession. If this occurs and you want to turn off Valet mode, use the GENESIS Connected Services App to reset your Valet mode password. Alternatively, contact the GENESIS Connected Services Center at 844-340-9741 for assistance.

Navigation functions

Navigation Menu overview

You can use the navigation system conveniently through various functions on the Navigation Menu screen.

Perform any of the following methods:

• •  On the All Menus screen, press Navigation Menu.
• •  On the control panel, press the [NAV] button.

1. Returns to the previous step.
2. Customize the navigation settings.
3. Search for a location by entering various types of keywords such as place name and address. ▶ See "Searching by keyword."
4. Search for a location by using the point of interest (POI) categories. ▶ See "Searching for nearby points of interest(POI)."
5. Select one of the destinations you entered previously. ▶ See "Searching from previous destinations."
6. Select one of the locations stored in your saved places. ▶ See "Using saved favorite places."
7. Search for GENESIS Dealerships easily. ▶ See "Searching for GENESIS Dealerships."
8. Cancel guidance to the destination. ▶ See "Canceling the route guidance."
9. View information on the entire route to the destination.
10. Edit the waypoints on the way to the destination. ▶ See "Editing the route."
11. Reroute by changing the route search option. ▶ See "Changing the route search option."
12. You can check accident and construction zone alerts on the map. ▶ See "Viewing traffic Information."
13. Register your home, office or other frequently visited places as a favorite location to make searching easier. ▶ See "Saving a frequently visited place as a favorite place."
14. The list of menu items appears.
    • •  Reorder Icons: Can change the location of an icon on the Navigation Menu screen.
    • •  Display Off: Turns off the screen. To switch the screen back on, press the screen or briefly press the power button.
    • •  User's Manual on Web (QR Code): Displays the QR code that provides access to the online user manual for the system.

Finding a route easily

Warning

Driving while distracted may cause a loss of vehicle control that may lead to an accident, severe bodily injury, or death. The driver's primary responsibility is the safe and legal operation of the vehicle, and the use of any devices or systems that take the driver's attention away from driving.

1. Perform any of the following methods:
   • •  On the All Menus screen, press Navigation Menu ▶ Search.
   • •  On the map screen, press .
   • Press and hold the [NAV] button on the control panel to enter into Places.
2. Enter the location data such as place name, address, or coordinates and then press OK.
   
3. Select a destination from the search result.
   • When the communication function is turned on, online search is performed first.
   • You can see the sites in the list on the preview screen at the right.
   • To sort the search results in a different order, press on the attribute to toggle between options.
   
4. Check the location of the destination and then press Route.
   
   • If you press Parking at the bottom right of the screen, the map screen displays the parking lot icon.
5. Select a route and press Start Guidance.

Warning

Distracted driving or negligence in keeping your eyes forward may cause a loss of vehicle control. Never use any devices or systems that take the driver's attention away from driving.

• The information on the map may differ from actual road conditions, depending on the location or driving conditions.
  • Digitalized roads may not be identical to the actual roads. When guidance does not match the actual route, drive the vehicle according to actual road conditions.
  • The system may provide guidance that differs from the actual route due to a change in road conditions. When guidance does not match the actual route, drive the vehicle according to road conditions with observing the traffic regulations. When the vehicle reaches a zone that matches the actual route, the system guides the route correctly.
• Vehicle location may not be displayed correctly if:
  • The vehicle is driving on a Y-shaped or winding road with narrow angles.
  • The vehicle is driving closely to another road.
  • The vehicle is driving on a road where there are many tall buildings in the vicinity.
  • The vehicle is driving on a new road or a road under construction.
  • The vehicle is transported by a ferry or heavy-duty transport vehicle.
  • The vehicle is driving in a rugged mountain area or on a steep curve road.
  • The vehicle is entering a public road after making a turn through the turntable in an underground parking lot or multi-story parking lot.
  • The vehicle stops and starts repeatedly or moves slowly in front of an intersection.
  • The system reboots after the vehicle battery has been recharged or replaced.
  • The vehicle is driving on a slippery road due to heavy snow, etc.
  • The tires have been replaced recently or spare tires (or studless tires) are used.
  • Improper-sized tires are used or the pressure of each tire is different.
  • The replaced tire is worn out or the studless tires have been used for over two seasons.
  • A roof carrier is installed on the vehicle.
  • On a highway continued driving causes the system to perform map matching or apply the updated GPS data.
• Navigation service may not be provided correctly under the following conditions:
  • When the vehicle drives on a straight road continuously, the system may guide you to drive straight. It is not a malfunction.
  • Guidance may not be followed immediately after the vehicle makes a turn at an intersection or drives through an intersection.
  • The system may guide you to make a U-turn in a prohibited area.
  • The system may guide you to a traffic-blocked road (e.g. no-entry road or road under construction).
  • The system may guide you to a road away from the destination when there is no road to the destination or there are only narrow roads on the way.
  • Guidance may not be proper when the vehicle is off the route.
  • Guidance may not match the actual distance on an overpass or underpass due to the difference of the start point.
  • When you are driving at high speeds, route recalculations may take longer.
• Because the navigation system is used for information purposes only, GENESIS does not assume responsibility of the accuracy of the information.

Map screen

The map screen provides various functions and informations, as follows:

1. Displays the Home screen.
2. Used to change the map display mode.
   • •   (North Up 2D): Displays the map with the north fixed at the top.
   • •   (Heading Up 2D): Rotates the map depending on the driving direction.
   • •   (Heading Up 3D): Rotates the map depending on the driving direction for 3D view.
3. Adjust the navigation sound volume.
4. Zooms in the map.
5. Set the map scale change mode to automatic or manual.
6. Zooms out the map.
7. Displays the point to change the driving direction.
8. Displays the next point to change the driving direction.
9. Displays the rest areas on the route.
10. Displays the lanes in different colors.
    • •  Brown: Recommended lane
    • •  White: Available lane
    • •  Gray: Unavailable lane
11. Displays quick menu items.
12. Stop the navigation guidance. ▶  See "Canceling the route guidance."
13. Displays the remaining distance to the destination and the estimated time of arrival. For more details, press the information item.
14. Displays or hides the detailed guidance.

• To see only the map with no destination, press the map area on the Home screen or on the All Menus screen, press Map. Or press the [MAP] button on the control panel.

Warning

Be sure to check the road conditions while driving, because the camera information may get changed occasionally after a map update to the latest version. Relying solely on the driving assist system may cause violation of traffic rules and regulations, resulting in an accident.

Using the detailed guidance

When the vehicle needs to change the driving direction or lanes, a zoomed-in map automatically appears.

• To display or hide the detailed guidance, press or .

When the detailed guidance appears while driving, select and perform the desired function.

• •  To view basic information including sections for turns, press Simple.
• •  To check the types of convenience facilities in a rest area, press Rest Areas.
• •  For information details about each zone such as intersections, interchanges, and rest areas, press Details.

Adjusting the navigation volume

You can adjust the volume of navigation or GPS warning sound.

On the map screen, press and then press or , or use the control bar to adjust the volume.

• To have the navigation sound always output first over media sound, check Navigation Volume Priority.
• To turn off the navigation voice, press and then press .
• To turn off the navigation sound effects, press and then press .

Canceling the route guidance

To cancel route guidance, press Cancel Route. Alternatively, press Navigation Menu ▶ Cancel Route on the All Menus screen.

The destination displayed at the bottom of the screen disappears and changes to .

• Press to search for the target destination to obtain an optimum route.
• To maintain the specified destination and stop the route guidance, press and hold Cancel Route at the bottom of the screen. The guidance stops and the Resume Route button appears. You can use the button to search for a previous destination and resume route guidance.