DMB

Activating DMB

Regarding DMB Broadcasting Reception

Terrestrial (VHF) DMB is a broadcasting service for mobile media.

Depending on the area, the reception condition may differ. However, for the safety, the video is not available while only the audio is played.

When receiving a DMB channel, the strength of wave may differ depending on the reception area or the reception can be degraded due to interferences. Therefore, if the reception is degraded, search the channel again by Search Channels menu.

The video can be degraded or the reception may fail especially in following areas:

  • Since DMB wave travels in very straight fashion, if there is any interference such as buildings or valleys, the reception condition becomes bad.

  • At a location near to the power lines of trolley, high power line or neon sign, the video may stop or noise may be produced.

  • The video can be erased or noise lines can be produced at a location near to a transmission antenna or steel tower of armature radio station.

  • In an automobile, if a mobile phone, wireless communication device or other electronic devices is used, the video can be stopped or noises can be produced.

  • In a far distance from the station, the wave is weak so that the reception condition can be degraded.

  • DMB TV broadcasts may not be available depending on local programing schedules, station circumstance, and wave environment, and programs may change due to changes in the broadcast transmission format. This receiver can receive DMB TV signals and supports data services (KBS TPEG) as well.

  • The screen automatically changes according to the mode corresponding to the selected DMB TV channel.

  • The mode of DMB TV is not separately controlled, yet, is determined according to the transmission format of the station.

Activating DMB Mode

Press HOME on the front seat control key or press [] and then press DMB.

  • For the safety, the DMB video is supported only when the gear is at P position.

  • For safety, the video is not supported and other partial features are restricted while the vehicle is in driving condition. However, audio can still be heard.

  • Even when the vehicle stops, if the gear is not in P position, the video is not supported.

  • The play video is displayed under the following conditions:

    • If the gear is in the P stage

    • If the gear is in the D stage and AutoHold

DMB Mode Screen Composition

  1. Moves to home screen.

    It moves to the home screen or a previous screen.

    Shows DMB menu.

    DMB video is displayed on the entire screen.

  2. DMB Display Screen

    Displays the video currently in play.

  3. Previous/Next file

    Moves to the previous/next file.

  4. DMB Channel List

    Displays the list of saved channels.

  5. Bang & Olufsen (If equipped)

    Shows sound modes as Reference and Surround.

Initial Channel Search Method (If no searched channel or After the factory release)

Searches channels if DMB TV is watched for the first time or no channel has been registered.

  1. Press DMB on the home screen. Initial channel search screen opens.

  2. To search channel, press Yes. To cancel initial channel search, press No.

  3. While searching for receivable channels, the following screen opens.

    To cancel channel search, Stop Stop.

    During initial channel search, if the channel search is canceled, switches to the home screen.

  4. When channel search is completed, the first searched channel is automatically received.

    When DMB channels are searched, TV and radio channels are searched simultaneously.

Searching Broadcasting Channels

If no broadcasting is available in a new area, the corresponding broadcastings in the area will be available by searching channels.

  1. Press [] > Search Channels in DMB mode.

  2. While searching for receivable channels, the following screen opens.

    Selecting Stop during channel search stops searching for channels and the channel previously watched will be played.

  3. When channel search is completed, the first searched channel is automatically received.

Selecting a Broadcasting Channel

How to Touch the Screen

Drag DMB channel list left/right and press a desired broadcasting channel.

Selecting by using the button on front seat control key

Turn the controller left/right and press it to select a desired broadcasting channel.

Selecting by using steering wheel remote control

Swipe the optical mouse on the steering wheel remote control to select the desired broadcast channel.

Moving DMB Channel List

You can change the channel stored in DMB channel list in the desired order.

  1. Press [] > Edit Channel List in DMB channel list.

  2. After long press on one in DMB channel list, reorder into a desired DMB channel list.

Deleting DMB Channel List

  1. Press [] > Edit Channel List in DMB channel list.

  2. Select the desired item, Press Delete > Yes.

    • Mark All: Selects all items.

    • Unmark All: Unmarks all items.

    • Cancel: Exits screen.

Switching DMB Display Screen (DMB List Screen/DMB Full Screen)

Touching on the screen switches to DMB list screen/DMB full screen.

Pressing [] on DMB list screen or pressing [] > Full Screen switches to DMB full screen.

Emergency Broadcasting List

Emergency Broadcasting List View

May check the list of flood, earthquake, heavy rain or other emergency broadcastings.

  1. Press [] in DMB channel list.

  2. Press Emergency Info.

  3. Check emergency broadcasting list by pressing Area, Time or Priority.

Deleting Emergency Broadcasting List

  1. Press [] > Delete Disaster Information in emergency broadcasting list.

  2. Select the desired item, Press Delete > Yes.

    • Mark All: Selects all items.

    • Unmark All: Unmarks all items.

    • Cancel: Exits screen.

Display Settings

  1. Press [] > Display Settings in DMB channel list.

  2. Refer to "Display Settings" for display settings.

Sound Settings

  1. Press [] > Sound Settings in DMB channel list.

  2. Refer to "Sound Settings" for sound settings.