Setting destinations

Destination search screen

Press [] > [Destination] on the map screen.

Search

Set a destination by entering the POI name, address or coordinates.

Previous destination

Set a previous destination as a destination.

Search POI

Set a destination through various facility categories.

Address book

Set the saved locations in the address book as a destination.

GENESIS service

Set Genesis service as a destination.

Setting destinations by search

Set a destination by entering the full name or initial, phone number or address.

1. Press [] > [Destination] > [Search] on the map screen.

Or press [] on the map screen.

2. Enter destination information, and Press [OK].

3. Press the desired location on the list.

4. Select a desired button.

• [Set as destination]: Set a destination.
• [Add tourpoint]: Add a tourpoint after setting a destination.
• []: Add the location to the address book. Press [] > [Destination] > [Address book] on the map screen to check the saved location.
• []: Make a phone call. If phone number is not saved or Bluetooth is not connected, the call is not available.

5. Press [Set as destination].

6. Press a desired route.

• [Recommended]: Guides the optimal route to the destination by considering the realtime traffic information, distance and cost.
• [Alternative]: Guides the alternative route to the destination.

Setting destinations by previous destinations

Set a previous destination as a destination.

1. Press [] > [Destination] > [Previous destinations] on the map screen.

2. Press the desired location in the list.
3. Refer to the step 4-6 of "Setting destinations by search" for next steps.

Setting Destinations by POI

Set a destination through various facility categories.

1. Press [Destination] > [Search POI] on the home screen.

Or press [] > [Nearby POI] > [Search POI] on the map screen.

2. Press a desired item.

• [Along route]: Search the facility in neighboring area of route.
• [Near current pos.]: Search the facility in neighboring area of the current vehicle location.
• [Near destination]: Search the facility in neighboring area of destination or tourpoint.
• [Near scroll mark]: Search the facility in neighboring area of selected location.

3. Select a desired list.
4. Refer to the step 4-6 of "Setting destinations by search" for next steps.

Setting destinations by address book

Set the saved locations in the address book as a destination.

1. Press [] > [Destination] > [Address book] > [Address book] on the map screen.

2. Press the desired location in the list.
3. Refer to the step 4-6 of "Setting destinations by search" for next steps.

,Note

Press [Name] or [Date] on the screen to change the sort method.

Setting destinations with Home/Office

Set the places saved as Home/Office as a destination.

1. Press [] > [Destination] > [Address book] > [Favourites] on the map screen.
2. Press [Home] or [Office].

3. Refer to the step 4-6 of "Setting destinations by search" for next steps.

Setting destinations by Genesis service

Set Genesis service as a destination.

1. Press [Destination] > [GENESIS services] on the home screen.

2. Press a desired item.

• [Along route]: Search the facility in neighboring area of route.
• [Near current pos.]: Search the facility in neighboring area of the current vehicle location.
• [Near destination]: Search the facility in neighboring area of destination or tourpoint.
• [Near scroll mark]: Search the facility in neighboring area of selected location.

3. Refer to the step 4-6 of "Setting destinations by search" for next steps.

Setting destinations via scroll

Set the place marked on the map as a destination.

1. Select a desired location or push touchpad to up/down/left/right on the map screen. The location is marked at the centre of the map.

2. Press [].

3. Refer to the step 4-6 of "Setting destinations by search" for next steps.

,Note

If the map is moved by scroll, the map is fixed and does not move even when the vehicle moves. Pressing [MAP] on the head unit switches the map to the current location. However, the automatic return is set as [] > [Navigation settings] > [Display] > [Scrolling auto-return], the map is automatically switched to the current location after a certain time period. When the map is moved by scrolling, the location name is displayed at the top of screen.