General information
Cautions for the use of USB
Please use it by installing a USB device after starting an engine. If the engine is started with a USB device installed, a USB device can be damaged.
If it is not a standard format file, it is not played.
- MP3/WMA file only supports a music file with a compression level of 8 Kbps to 320 Kbps.
- Be careful of static electricity when connecting and disconnecting a USB external device.
- If encrypted MP3 player is connected to an external USB device, it is not recognized.
- When connecting a USB external device, it may not be recognized depending on the condition of a USB external device.
- It supports FAT16, FAT32, exFAT and NTFS.
- Some USB devices may not be supported due to compatibility issue.
- Please do not allow human body or object to touch the USB connection.
- Connecting and disconnecting a USB device for a short time repeatedly can cause its failure.
- Please connect and disconnect a USB external device only with the audio power turned off.
- The recognition time can vary depending on the type, capacity and format of a stored file but it is not a product failure.
- When using separate devices like USB HUB and extension cables, the USB may not be recognized. So, please use it by directly connecting to an infotainment system port of a car.
- When uploading an application program in a specific USB, the file may not be played
- When the USB device, that is not recognized as removable discs like MP3 Player, mobile phone and digital camera, was connected, it may not be operated properly.
- The charge through USB may not be supported in case of some mobile devices.
- No operation may be guaranteed except standard product (Metal Cover Type) USB memory.
- The operation of HDD Type, CF and SD memory is not guaranteed.
- The file that applied DRM (Digital Rights Management) is not played.
- The USB memory stick (SD Type or CF Type) used by being inserted into an adapter may not be recognized.
Playable file standard
Playable audio file standard (USB)
- Playable file format: “.mp3”, “.wma”, “.mka”, “.wav”, “.flac”, “.ogg”, “.ac3”, “.dts”, “.m4a”
- Playable Codec format: “MPEG-1 layer I, II, III”, “AC-3”, “AAC”, “WMA”, “PCM (WAV only)”, “ADPCM (WAV only)”, “DTS”, “FLAC”
- Sampling frequency: 8 - 48 KHz (MP3), 22.5 - 96 KHz (WMA), 8 - 192 KHz (PCM/WAV),
8 - 44 KHz (ADPCM/WAV), 32, 33.1, 48 KHz (AC-3), 8 – 192 KHz (AAC), 8 - 192 KHz (FLAC), 8 - 192 KHz (DTS) - Bit rate: 8 - 320 Kbps (MP3), 20 - 320 Kbps (WMA) , 8 ~ 12.3Mbps (PCM/WAV), 8 ~ 352.8Kbps (ADPCM/WAV), 8 – 320Kbps (AC-3) , 8 - 320 Kbps (AAC) , 8~4.6Mbps (FLAC, ALAC, APE, TTA, AIFF)
Playable video file standard
- Playable file format : “.avi”, “.mpg”, “.mpeg”, “.mp4”, “.asf”, “.wmv", “mkv”
- Playable Codec format : “MPEG-1”, “MPEG-2 simple profile – main level”,
“MPEG-2 main profile – low,main,high level”, “VC-1”,”AVC”,
”H.263 profile 0 ~ profile2”,”MPEG4 v2,v3” - Playable resolution and frame rate: (MPEG-1) within 1280 x 720 30fps, 720 x 480p 30fps / 720 x 576p 25fps (H.263), 1920 x 1080 30fps (other supported Codec format)
Playable subtitle standard
- Playable file format : “.smi”,”.srt”
- Playable subtitle language : Korean, English, Japanese, Chinese etc
- When the file name of image and subtitles is different, subtitles may not be displayed.
Registered trademark and license
DOLBY
|
The product is produced under the license of Dolby Laboratories. “Dolby” and the Double “D” signs are the trademarks of Dolby Laboratories.
DTS Digital Surround
|
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. (for companies headquartered in the U.S./Japan/Taiwan) or under license from DTS Licensing Limited (for all other companies). DTS, Digital Surround, and the DTS logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2020 DTS, Inc. ALL RIGHTS RESERVED.
Bluetooth®
|
Bluetooth® word mark and logo is a registered trademark of Bluetooth SIG, Inc. and all the Bluetooth marks and logos are under the license. In order to use Bluetooth wireless technology, a mobile phone, that Bluetooth function is supported, is required.