Using voice recognition system

What is voice recognition?

Voice recognition technology runs the system as ordered by recognizing your voice command to help with the operation of media while you are driving the car.

Regretfully, not all possible voice commands are recognized by the system due to technological limitations.

To make up for these limitations, the system displays the voice commands that are available for you to use.

There are errors in communication between people.

Likewise, voice recognition sometimes misunderstands your voice command under certain circumstances.

If this happens, either check the screen for the available options and say the command again, or manually select and press the button for the corresponding command on the screen.

Voice recognition features by language

Voice recognition support availability varies according to the language set for the system.

Please verify the current language setting before using the voice recognition.

If you change the language set for the system to Korean, voice recognition will not be supported. Change the system language to other language.

Operating voice commands

Condition for voice commands system

Most of the functions can be operated by voice.

Please follow the instructions below for optimal voice recognition performance.

To improve the voice recognition performance, keep your car interior quiet by closing all windows and the sunroof.
Press the voice recognition button and say the desired voice command after the beep sound.
The microphone is positioned above the driver. Voice commands should be spoken by driver practicing proper posture.
Pronounce the voice commands naturally and clearly as if in a normal conversation.
Special symbols of Phonebook Name are not considered in voice recognition. Ex) James-Smith : "James Smith"
House number or digits in Phonebook Name should be spoken discretely. Ex) S1234 : "South one two three four"
Depending on the specifications, some commands may not be supported.

Starting voice recognition

Press the voice recognition button on the steering wheel remote control.
Say the desired voice command after the beep sound.

,Note

For proper recognition, please say the command after the voice instruction and beep sound.
You can set the voice recognition guide sound. For more details, refer to the "Voice recognition settings".

Skipping prompt messages

Press the voice recognition button on the steering wheel remote control briefly again during the voice recognition guidance.

Ending voice recognition

Press and hold the voice recognition button on the steering wheel remote control while voice recognition system is operating.
While the voice recognition system is operating, press any button on the head unit or press the [Exit] on the screen.

Adjusting voice recognition volume

During the voice recognition system operation, the volume can be adjusted with the volume button on the front seat control key or the volume button on the steering wheel remote control.

Voice recognition commands list

Voice recognition commands are classified as "Global Commands" and "Local Commands".

Global commands (●): Commands that can be used immediately after activating voice recognition.
Local commands (□): Commands that can be used in specific multimedia/navigation/Bluetooth mode states.

,Note

Some commands will operate properly only when a USB, Bluetooth or other device has been connected.

Basic commands

Command		Operation
●	Commands (Help)	Goes to the voice recognition help screen. All available commands can then be identified and used.
□	Yes/No	When voice recognition is active, this command is used when an answer is requested for a confirmation question.
□	Line 1-4 (One-Four)	When you cannot select a certain name, such as in call history, you can select it using line number. Simple numbers, such as "one" and "two", can be recognized.
□	Next/Previous	When five or more searched items are listed, you can move to the previous or next page using a voice command.
□	Manual Input	When dial or destination search results are displayed, this command is used to search manually rather than searching using a voice command. Voice recognition stops after this command is used.
□	Go Back (Back)	Goes back to the previous screen.
●	Exit	Ends the voice recognition.

Radio commands

Command		Operation
●	FM	It plays FM radio.
●	AM	It plays AM radio.
●	SiriusXM	It plays SiriusXM radio.

Phone commands

Voice commands related to phone calls can be used after connecting the Bluetooth phone device.
To call a person, you must first download the mobile phone contacts.
After downloading the Bluetooth phone contacts, it will take some time to convert the phone contacts into voice data during which time you cannot make a call by name yet.
The time that it taken to convert voice data may vary depending on the number of contacts downloaded.

Command		Operation
●	Call	Downloaded mobile phone contacts is displayed on the screen, and afterwards, you can make a call by speaking the name.
●	Call <Name>	You can immediately make a call to (name) in the downloaded mobile phone contacts. Ex.) “Call John Smith”
●	Call <Name> on mobile	You can immediately make a call to (name) in the downloaded mobile phone contacts saved as ‘mobile’. Ex) "Call John Smith on mobile"
●	Call <Name> at Work (Call <Name> in office)	You can immediately make a call to (name) in the downloaded mobile phone contacts saved as ‘work’. Ex.) “Call John Smith at work”
●	Call <Name> at home	You can immediately make a call to (name) in the downloaded mobile phone contacts saved as ‘home’. Ex) "Call John Smith at home"
●	Call <Name> on other (Call <Name> on other number)	You can immediately make a call to (name) in the downloaded mobile phone contacts saved as another phone category except ‘mobile, home, work’. Ex) "Call John Smith on other"
●	Dial number	Displays a screen where you can say a phone number to dial.
●	Dial <Phone #>	You can make a call by directly speaking the number you want to call. Ex) Dial 123-456-7890 : "Dial one two three four five six seven eight nine zero"
●	Change Bluetooth device	It can disconnect from the Bluetooth device currently connected and connect to other Bluetooth devices already paired.

Navigation commands

Check the following before you use navigation commands:

Search for and find addresses located in the state or province your car is currently in.
If you want to search in another state, say the name of state/province and then say the address.
Searches are sorted by city/province for quick search.
Some commands are available only when the destination is fixed.

Command		Operation
●	Saved places	Moves to the traffic Information menu screen.
●	Traffic information	Moves to the traffic Information menu screen.
●	Go home	Set your home as the destination. Your home address must be set up in the navigation system.
●	Change home	Changes location for home.
●	Go to work	Set the destination to your office/place of work. Your office/place of work must be set up in the navigation system.
●	Change work	Changes location for work.
●	Previous destinations	Displays a list of recent destinations and you can set a destination by saying the number on the list.
●	Cancel route	Cancels the route to the fixed destination and exits guidance.
●	Pause route	Pauses the route guidance.
●	Route options	Moves to the route options screen.
●	Reroute	Restarts the route guidance.
●	Destination information	Tells you the remaining distance and time to your destination.
●	Route Overview (Show Route)	Displays a map overview of the entire route to your destination.
●	Previous Searches	Displays a list of previous searched points.

List of Nearest Locations

Navigation location names may be changed after a software update.

Payment commands

After you arrive at a gas station that supports CarPay, check the following before you use carpay commands. These commands are applicable to U.S.A, not to Canada.

Command		Operation
●	Pay for gas	Start gas station payment with CarPay.
●	Pay for pump	Start gas station payment with CarPay.
●	Pay for charging	Start charging station payment with CarPay.